LED Tube
Sensor LED Tube

LED Radar Sensor Tube Light

enquery: 
image1: 
image2: 

1.Features for radar sensor tube light

Radar sensor is also called with Microwave induction, which is designed on the base of Doppler
Effect. Compared with infrared sensor, it has wider induction range. There are any movements in
the induction area, the switch can get the signal even though there are a wall or glasses between the
switch and movements. It can be used in the triproof fixtures. 
 

2.Specification:

Model

V-RT8G13-120SB288AF-RS 

Color

WW(2700-3000K), DW(4000-4500K), CW(6000-6500K)

Light source

3528 288 PCS

CRI

 >73

Delay time

20-60mins according to your requirement.

Per LED Lumen

7-8 LM

Whole Lamp Lumen

1650 lm± 5%

The Power Consumption

18W

Beam Angle

140 °

Power Factor

0.9

Voltage

85-265 V AC / 50-60hz

Lifespan 35,000 hours (70% retention rate of lumen Ta = 25 ° c)

Material shell: aluminum , The optical system

PC diffusion hood

Main application: Corridor, passage way, warehouse & underground parking lots etc

 

3.Operation Principle

LED Tube with radar sensor to detect if there are moving object, It works if the moving object enter into its
detectable range. Or It's shift into a save electricity mode when the moving object went away.  For example:

1.No moving objects in the detectable area: It glimmers 2.5W when no moving objects. Not only meet the

requirement of security monitoring lighting, but also save electricity in maximum limit which is 90% energy saving.

2.Detecting moving objects: It fully lights when the moving object was detected, the power changes to 16W which

is very bright. The radar LED tube will keep lighting if there are moving objects in the inductive zone.

3.After the moving objects went away: it turns to dormant state again after 40s, the power changes to 2.5W again.

yinjidengguan_1.jpg

leida.JPG

4.Dimension:

ganyingdengguan_2.jpg

 

To prevent automated spam submissions leave this field empty.